Millennium Power Systems

Millennium Power Systems excels in the Design and Manufacture of Custom Military and Ruggedized Power Supplies that meet the most demanding Military, Industrial, and Commercial Standards. Targeting primarily Military Subcontractors of Chassis and System integrators, MPS is structured to handle small run and short Time-to-Delivery orders, and is capable of Fast-Turn customization of our robust designs.

Millennium Power Supplies is exclusively represented by The Tricamo Company, Inc. Click Here to Contact TTC with any inquiries you may have.

Our products feature these outstanding characteristics:
- Both Conduction and Convection Cooling able to withstand High Temperature Environments
- Single and Three Phase, Full Range Inputs with Active PFC Circuitry
- Small Profile Mechanical Outlines
- Standard and Custom Designs
- Designed and Built/Assembled in the USA

Millennium's Line of Power Supplies:: Ruggedized ATX; MPP 500W Power Module; 1KW, 1U High; 1KW, 1U High with 3 Phase Input; 2KW, 1U High

Ruggedized ATX Power Supply

The Ruggedized ATX Power Supply was designed to meet the harsh conditions encountered within a particular Military Subcontractor's Chassis design, taking its input voltages from AC, stand-alone +28V battery, or direct connection to a HMMWV's (Humvee) electrical system, while supplying independently regulated voltages appropriate for any Intel, VME, or cPCI motherboard and typical peripherals. Millennium Power Systems welcomes all inquiries regarding other possible applications, and will provide any assistance necessary to repackage this outstanding product to meet your physical form requirements. This product is manufactured completely within the USA.

[Rev 0.8] Ruggedized ATX Power Supply Key Features:: AC Input: 105VAC to 240VAC, 60Hz to 400Hz; DC Input: 18VDC to 32VDC; ATX Compatible Outputs: +3.3VDC, +5VDC, +/-12VDC, +5VDC Standby; Auxiliary DC Outputs: +12VDC, +24VDC Bus and +28VDC; Integrated Battery Backup Circuit for Power Out Conditions; Integrated Battery Charger Circuit optimized for Lead-Acid Cells; Smart Chassis Control for Power up/down; ATX Output Cables with minimal output impedance; Auxiliary Outputs connector for drives, fans, GPS and +28VDC; Designed for Cold Plate Conduction Cooling; Power Supply Status Signal: Output Voltage(s) and Over-Temperature Failures; Fault Indicator LED: Input and Outputs OK; Meets applicable parts of MIL-STD-1275B, modified; MIL-STD-461; MIL-STD-810F

Technical Data:: ATX Ruggedized PS Data Sheet: (pdf),; Outline Diagram: (htm); Representative Images: (htm)

MPP 1U, 500W Power Supply Module

The MPP 1U 500W Redundant Power Supply is the basic building block of Millennium Power System's Product Line of 1U Power Supplies. Among several other Input and Output options, there are two basic models:

MPP1-0500R5-0033: +3.3V @ 60A

MPP1-0500R5-0050: +5.0V @ 60A

[Rev x.x] MPP 1U 500W Redundant Power Supply:: DC Input: ??VDC to ??VDC; Outputs: +3.3VDC, +5VDC, +/-12VDC, +5VDC Standby; Active Power Factor Correction; Redundant operation; Remote management through I2C; Single wire current sharing on +5V, +3.3V and +12V; Diode isolation; Power good signals, TTL and open collector; Secondary power enable/disable; Inhibit, Fan Fail & multifunction LED; No minimum load; Short-circuit protection; Overload protection with constant current and delayed latching; UL, CUL and DEMKO approval, CE compliant; Designed for 1U applications; Handle and user latch; Ruggedized hot swap connector; Multiple input and output configurations; Optional cooling configurations

Technical Data:: MPP1-0500R5-0033 Data Sheet: (pdf),; MPP1-0500R5-0050 Data Sheet: (pdf),; Outline Diagram: (htm); Representative Images: (htm)

1000W High-Density Power Supply System

The 1000W High-Density Industrial Power Supply was designed contains 2 MPP Power Supply Modules, perfect for 1U height requirements. Each MPP Module may be operated independently as 500W, N+1 redunancy system, together at 1000W.

[Rev 1.1] 1000W High-Density Industrial Power Supply Features:: Major outputs (+3.3, +5, +12) are designed for high current (60 amp / 30 amp); Single wire current sharing and remote sense; All outputs (+3.3, +5, +12, -12 and 5vsb) use independent regulation with no minimum load; CPCI or ATX compatible; Tight tolerance on outputs+/- 3% or better; Redundant and hot pluggable; Each power supply will have handle and latch; Thermal shut down; EMI designed for harsh environments; Backplane design to support full 1000 watts; Status controller supporting status and fault LEDs, communication channel, TTL signals; Remote LED or buzzer option; Compliance and Standards: UL1950, CUL, TUV 60950, CE, EN55022 Class B, FCC part 15

Technical Data:: ????-0500R5-0033 Data Sheet: (pdf),; ????-0500R5-0050 Data Sheet: (pdf),; Outline Diagram: (htm); Representative Images: (htm)

1000W, 1U High-Density, 3 Phase Input Power Supply

1U High-Density 3 Phase Industrial Power Supply was designed this product is identical to the 1K, 1U high configuration, but was designed to accept 3 phase, 400VAC power inputs found in Avionics Chasses.

[Rev x.x] 1U High-Density 3 Phase Industrial Power Supply Features:: **!** Major outputs (+3.3, +5, +12) are designed for high current (60 amp / 30 amp); **!** Single wire current sharing and remote sense; **!** All outputs (+3.3, +5, +12, -12 and 5vsb) use independent regulation with no minimum load; **!** CPCI or ATX compatible; **!** Tight tolerance on outputs+/- 3% or better; **!** Redundant and hot pluggable; **!** Each power supply will have handle and latch; **!** Thermal shut down; **!** EMI designed for harsh environments; **!** Backplane design to support full 1000 watts; **!** Status controller supporting status and fault LEDs, communication channel, TTL signals; **!** Remote LED or buzzer option; **!** Compliance and Standards: UL1950, CUL, TUV 60950, CE, EN55022 Class B, FCC part 15

Technical Data:: ????-0500R5-0033 Data Sheet: (pdf),; ????-0500R5-0050 Data Sheet: (pdf),; Outline Diagram: (htm); Representative Images: (htm)

2000W High-Density Power Supply System

The 2000W High-Density Industrial Power Supply contains 4 MPP Power Supply Modules, perfect for 1U height requirements. Each MPP Module may be operated independently at 500W each, together at 2000W, or in N+1 redundancy mode.

[Rev 1.1] 2000W High-Density Industrial Power Supply Features:: **!** Major outputs (+3.3, +5, +12) are designed for high current (60 amp / 30 amp); **!** Single wire current sharing and remote sense; **!** All outputs (+3.3, +5, +12, -12 and 5vsb) use independent regulation with no minimum load; **!** CPCI or ATX compatible; **!** Tight tolerance on outputs+/- 3% or better; **!** Redundant and hot pluggable; **!** Each power supply will have handle and latch; **!** Thermal shut down; **!** EMI designed for harsh environments; **!** Backplane design to support full 1000 watts; **!** Status controller supporting status and fault LEDs, communication channel, TTL signals; **!** Remote LED or buzzer option; **!** Compliance and Standards: UL1950, CUL, TUV 60950, CE, EN55022 Class B, FCC part 15

Technical Data:: ????-0500R5-0033 Data Sheet: (pdf),; ????-0500R5-0050 Data Sheet: (pdf),; Outline Diagram: (htm); Representative Images: (htm)

Copyright © 2006 Millennium Power Systems, Inc. No material may be reproduced without written permission.
Contact the Webmaster